A fine buffing oil to restore and rejuvenate existing oil finishes. Perfect to maintain timber after the application of Hard Burnishing Oil for a soft satin result.
Uses
Available in:
Coverage:
Up to 30 m2
Apply with:
Brush or Lambswool Applicator
Number of coats:
2
Recoat:
48 Hours
Sheen Level:
Transparent Matt Finish
100% pure natural oil for the nourishment and protection of all external timbers. Provides anti-mould fungal protection. Contains genuine tung nut oil, citrus solvents and natural beeswax for water repellency and protection against wood rot. A natural alternative to petroleum hydrocarbons and water-based oils. Specifically formulated to suit the Australian and New Zealand harsh climates. Preserves and rejuvenates, protects, nourishes and waterproofs.
An internal finishing oil formulated from natural plant oils, with genuine Tung Oil as the major component. Recommended for areas where timber is subject to regular wear & tear, it creates a water-resistant surface. Suitable for flooring, bench tops, tabletops & food serving items. Nourishes, preserves & moisturises. Natural colour/character enhancement. Seals raw internal timber for satin finish. Natural alternative to Petroleum hydrocarbons and water based oils.
A low sheen finishing oil based on Tung Nut Oil, Beeswax, Citrus solvents and anti-fungal oils that penetrates the timber substrate to nourish, preserve and seal; as well as providing protection against weather degradation and rot. A natural alternative to petroleum hydrocarbons and water based oils
Wash-A-Way is a safe and effective alkaline salt based cleaner and soaker, with an oxidizing, mild bleach action. Wash-A-Way is not a chlorine bleach. The active ingredients are alkaline salts and sodium bicarbonate, which also have anti-bacterial properties. Mix with water for an effective, anti-bacterial cleaner.
Woodguard New Timber Treatment– Seals & Protects A highly penetrative, light plant oil & beeswax interim wood protectant. Designed for a one coat only application catering for exposed, raw timbers prior to final finishing. Timbers that are fully exposed to the elements are to be cleaned with Organoil Wash-A-Way before use.
A fine buffing oil to restore and rejuvenate existing oil finishes. Perfect to maintain timber after the application of Hard Burnishing Oil for a soft satin result.
Our traditional Danish Oil is based on genuine Tung Nut Oil and is perfect for internal timbers. It highlights the natural character of your timber, bringing out its traditional patina with a warm finish.
Polishes internal furniture & joinery that has been previously waxed or oiled. Rejuvenates french polished/lacquered items and leather items.
Pure Tung Oil is obtained from the seeds of the tropical Tung Tree. As a timber finish, it is widely used as a drier in varnishes and paints. The finish is suitable for interior or protected exterior use than fully exposed exteriors, due to its lack of UV Resistance.
A highly versatile, powerful & natural solvent. An ideal thinner for Tung oil, it assists with oil penetration into porous surfaces – timber, concrete, mud brick, slate & terracotta. An exceptional cleaning solvent, Citrus Terpene has a greater ‘cutting’ power than mineral turpentine.
A complex blend of natural plant oils, including Mustard Seed, specifically formulated to provide a rich lustre under high speed friction. Drives deep into the timbers pore structure reflecting a warm, rich glow from within.
Danish Oil